Battery Chargers Vancouver

BATTERY WORLD CHARGERS

 

  6 Volt, 12 Volt, & 24 Volt Battery Chargers

The Best Quality…right down to their easy-to-read product faceplates, packaging and operating instructions. The Best Selection…including a complete line of affordably-priced chargers to fit any budget. These battery chargers can be used for charging Flooded , Sealed AGM and Gel Batteries. We also have an adaptor to use with XLR type connectors for Mobility Scooters

0225-1
TE4-0225
SELECTABLE VOLTAGE
6 Volt,  12 Volt
  • Input Voltage: 120V AC, 60Hz
  • Output Voltage: 6 Volts DC and 12 volts DC;
  • Charging current:
  • 2 amp for 6 volt batteries;
  • 2 amp  or 4 amp  for 12 volt batteries
  • Battery Chemistry: all types of 6V/12V Lead-acid batteries ( WET, MF, AGM AND GEL);
  • Reverse polarity, Overcharge and Short circuit protection;
  • Error beep warning with LED display;
  • LED power and charging indicators.
  • Detachable and interchangeable lead sets—clamps and eyelet terminals

 

TE4-0227
TE4-0227
Selectable Voltage
12  Volts, 24 Volts
  •  12 Volt 24 Volt AUTOMATIC SMART BATTERY CHARGER
  • Input voltage: 120V AC, 60 Hz
  • Output voltage: 12 V DC and 24 V DC
  • Charging current:2 Amp 5 Amp ,10 Amp for 12 Volt  batteries;
  • 2 Amp  5 Amp for 24 Volt batteries;
  • 13.6 Volt /4 Amp  power supply;
  • Electronically protected against overcharge,short
  • circuit,reverse polarity and overheat;
  • Fully automatic diagnose,recover,charge and maintain;
  • For all lead-acid batteries (WET, MF, AGM and GEL);
  • Use the charger as a power supply(13.6V/4A);
  • We also have an Adaptors for XLR plugs on Mobility Scooters
TE4-0236
TE4-0236
Selectable Voltage
6 Volts 12 Volts
    • For all 12Volt  and 6 Volt  lead acid batteries;
    • Battery Type Switch to set proper charge rate for SLI or Deep Cycled batteries;
    • Charge Rate Switch to set the maximum charging current as below:
    1.   2 amp or 10 amp for 12V batteries
    2.   6 amp for 6V batteries
    • 2 LED indicators – Full Charge and Power On
    • With the Ammeter indicates the charging current

 

TE4-0237

TE4-0237
12 VOLT 1 AMP
 Battery Tender

    • Input: 100 V-120 V
    • Output: DC 12V
    • Current : 1 Amp
    • Spark proof during lead connection,
    • Reverse polarity protected
      • Solid state two color LED indicates stage of charger
    • The perfect device for battery maintaining and charging
    • For cars, motorcycles, boats, auto, farm machinery ,RV”s
    • It”s very simple for use; hook it up, connect it and forget it.