50 Watt  Solar Panel Kit

RVwithsolarapanelkit

50 Watt RV Solar Panel Kit

This kit provides you with everything you need to install your own efficient solar power system and begin generating electricity. The heart of the kit is the SunGold 50-watt monocrystalline solar panel which converts sunlight into direct current (DC) electricity.

The 10 Amp charge controller keeps your batteries fully charged and at the same time, protects them from over-charging. This complete RV solar kit includes all the mounting hardware and wiring you need for a trouble-free installation.

$270 : 604 473 9500

50wattSolarTekSolarPanels

SunGold SG-50 Watt Panel

A proven high efficiency crystalline silicon solar product with years of reliable service that is durable in outdoor weather conditions. It measures 816x540mm with 36 cells. Precision manufactured by SunGold

System Volts: 12 or 24 volts

Battery Type: Gel, AGM, Flooded
Rated P V Input: 10 amps
Rated Load: 10 amps
Self Consumption: 7.8- 8.4  milliamps
Operating Temp: -35 to + 55°C
MT 50 Meter Available
Programmable Battery Capacity

Programmable lighting controller

EP SOLAR
Landstar LS1024B Solar Controller

New LandStar series is Epsolar’s new generation programmable solar charge controller.  All the models adopt aluminum heat sink  which enables the reliability in high temperature enviroments. RS-485  connects to a remote meter or PC for real-time monitoring, custom setting and control etc.

AWG10solarcable&MC4conncectors

40 Feet AWG10 MC-4
Positive and Negative
Connecting Wires

Solar MC4 Connectors
& AWG10 Wire

Can be installed on conventional solar module junction box or solar combiner box for ‘plug n play’ interconnection or added to solar modules with existing MC4 connectors for extended distances. Greatly speeds up installation of solar array! Easy to install.

  • Rated current 30 amps
  • Max Voltage 1000V
  • “Snap in” locking system
  • Temperature range -40C to 90C

solarmounting

Solar Panel Mounting Hardware

Handy Z Shaped Mounting Bracket hardware
for fastening the panel securely to the surface of the RV. The Z-brackets allow for a slight elevation of the panel from the hot roof surface thus making the solar unit work more efficiently by allowing convected air flow. Brackets are made of aluminum with stainless steel screws.